Ticketing 
Market:
Italy
QTR Series
The QTR range constitutes the most compact series of torque motors in Tecnotion’s catalog. Its small size and low-voltage winding make it ideal for robotics, logistics, electronics, and semiconductor machinery applications.
With an outer diameter ranging from 65 mm to 160 mm and an inner bore from 17 mm to 111 mm, these motors offer unique opportunities for compact applications.
More info at tecnotion.com
Technical Specifications
- Peak torque: 0.64 to 91.6 Nm
- Continuous torque: 0.29 to 36.3 Nm
- Heights: 17, 25, 34, 60 mm
Attributes
High torque
Low voltage
Through bore
Download
Brochure_Frameless_Torque_2.3 
QTR Series
The QTR range constitutes the most compact series of torque motors in Tecnotion’s catalog. Its small size and low-voltage winding make it ideal for robotics, logistics, electronics, and semiconductor machinery applications.
With an outer diameter ranging from 65 mm to 160 mm and an inner bore from 17 mm to 111 mm, these motors offer unique opportunities for compact applications.
More info at tecnotion.com
Attributes
High torque
Low voltage
Through bore
Technical Specifications
- Peak torque: 0.64 to 91.6 Nm
- Continuous torque: 0.29 to 36.3 Nm
- Heights: 17, 25, 34, 60 mm
Download
FAQ
It is the torque the motor can generate beyond the saturation point, in the non-linear region of the motor’s torque constant. In this condition, the effective value of the torque constant is 26% lower than the catalog value. This parameter applies only to torque motors. Since the efficiency of current-to-torque conversion decreases, the windings heat up more quickly. At ultimate torque, the temperature rise is 10 K/s or 20 K/s, depending on the motor series.
In iron core motors, peak torque is the torque generated immediately beyond the saturation point of the motor’s torque constant. In this condition, the effective value of the torque constant is 14% lower than the catalog value. The windings heat up at a rate of 6 or 20 K/s, depending on the motor series. Ironless motors, on the other hand, do not have a torque constant saturation point. In this case, peak torque is determined by the maximum allowable thermal expansion of the winding material. For these motors, the temperature rise is 20 K/s.
The motor constant is the ratio of torque generated (in newton-meters) to power dissipated as heat (in Watts), expressed in Nm²/W. A higher constant value indicates that the motor generates the same torque while dissipating less heat, making it more thermally efficient. The constant value decreases as winding temperature increases, due to the rise in phase-to-phase electrical resistance (Rph-ph).
Formula: S = K² / (3 × Rph-ph)
Request information
Massimo
Product Manager
Massimo
Product Manager
